4 Channel Optical Add Drop Multiplexer Single fiber 1470/1490/1510/1530nm
GEZHI's Optical Add Drop Multiplexer is single fiber with four channel of CWDM wavelength 1470nm 1490nm 1510nm and 1530nm. The optical Add & Drop multiplexer combines wavelength channels onto an optical transmission fiber. Gezhi's 4CH CWDM OADMs are used in WDM systems for multiplexing or demultiplexing and routing fiber optic signals, selectively adding and dropping individual or sets of wavelength channels from a CWDM stream.
The CWDM OADM modules are available in single-sided (East or West) and dual-sided (East and West) configurations supporting up to four wavelengths. Each GEZHI's CWDM OADM uses wavelengths from 1270nm to 1610nm or 1271 to 1611nm with 20nm spacing.
Features
Flexible OADM networking
4 channel East & West
Mid span access nodes for amplification and dispersion
No electric power required.
Applications
Cellular Application
Fiber Optical amplifier
Acess Network
Line Monitoring
WDM Network
Telecommunication
Specification
| Parameter | Unit | 4CH CWDM OADM |
| Add | Drop |
| Channel Wavelength | nm | 1470,1490,1510,1530nm |
| Center wavelength Accuracy | nm | ±0.5 |
| Channel Spacing | nm | 20 |
| Channel Passband (@-0.5dB bandwidth | nm | >13 |
| Insertion Loss | dB | 1.5 | 1.5 |
| Channel Ripple | dB | 0.3 |
| Isolation | Adjacent | dB | >30 |
| Non-adjacent | dB | >40 |
| Inertion Loss Temperature Sensitivity | dB/℃ | <0.005 |
| Wavelength Temperature Shifting | nm/ ℃ | <0.002 |
| Polarization Dependent Loss | dB | <0.1 |
| Polarization Mode Dispersion | dB | <0.1 |
| Directivity | dB | >50 |
| Return Loss | dB | >45 |
| Maximum Power Handling | mW | 300 |
| Opterating Temperature | ℃ | -5~+75 |
| Storage Temperature | ℃ | -40~85 |
| Package dimension | mm | L100x80x10 |
Note: 1. Customization is available.
2. Specified with connector
Drawing
West and East
It drops the individual channel and adds that same channel back onto the network fiber in dual-sided transmission.
Four channel 1470,1490,1510,1530nm CWDM add & drop multiplexer for EAST&WEST for bi-directional data transmission over single fibers.
Customized Connector
| Connector Type Various connector are available, LC/SC/FC, to meet your different needs in various situations. | Polish Type UPC is designed for digital signal transport. APC is preferred for RF video signal transport and FTTx applications. |
 |  |
Product Tags:
|
|
Single Fiber 1530nm 4 Channel Optical Add Drop Multiplexer Images
|
